Creation of the first layer of the cinder block fire pit smokehouse. Use five cement blocks. The rear of the smokehouse consists of a block of ash in a horizontal position. Place two blocks of ash along the length of each side of the center block. Insert a 1/8-inch; this will lift the front unit in the next layer.
12 Photos Gallery of: Make a Concrete Cinder Block Fire Pit Smokehouse
Create the second layer by placing cinder block fire pit on the first layer of blocks. Insert two concrete blocks on the front, on the lintel of metal, width. Third layer forms the smokehouse by square concrete blocks over the second layer. Place a block in the widthwise half of the back, with two running another in the longitudinal direction along the sides. Repeat step 3 and 4 to form of blocks.
Create the sixth layer block repeating the process in step 3 for the placement of the block. The construction of the cinder block fire pit in the smokehouse with seven cement blocks. Place two blocks in the longitudinal direction on both sides of the smokehouse. Lay three blocks of ash in the width direction, opposite to each other, above the two vertical lines of concrete blocks.