Faux Fireplace Mantel Design

Sep 16th

A tablecloth for the faux fireplace mantel or broker provides a colorful backdrop for the Yule decorations on display.

fireplace mantel surrounds ideas
fireplace mantel surrounds ideas

Measure the length of the faux fireplace mantel and add two to four feet (61-122 cm). This provides one to two feet (31 to 61 cm) from each end drop. Choose the shortest length draped if you have a working fireplace.

12 Photos Gallery of: Faux Fireplace Mantel Design

Image of: fireplace mantel surrounds ideas
Image of: Best Stone Fireplaces Designs Ideas
Image of: fireplace mantel ideas
Image of: Corner fireplace mantels ideas
Image of: TV Cabinet Design With Fake Fireplace
Image of: Fireplace Mantels Vintage
Image of: Decor Design Faux Marble Fireplace Mantel
Image of: Fireplace faux mantel ideas
Image of: Fireplace faux wooden mantel ideas
Image of: Faux Fireplace Enchanting Design
Image of: Pearl Faux Fireplace Design
Image of: Faux Fireplace Mantel Design
 

Measure the width of the faux fireplace mantel and add one inch (2.5 cm) seam allowance. Use sharp to cut the fabric with scissors the correct dimensions. Place the fabric on a cutting table with the back towards the ceiling. The reverse side is the dull side of the fabric.

Turn the iron to its lowest dry. Do not use any steam setting. This can cause the dyes in fabric satin run, leaving unsightly stains. Place a cloth to press the fabric and removes wrinkles slipped making a move to the right from the center to the left and away from the center to the right. This prevents the tissue from slipping new wrinkles are created.

Make a fold of a half inch (1.2 cm) along both long edges of the fabric. Not iron the fabric along the crease. Sewn along either side of the fabric, of a quarter inch (0.6 mm) of the fold.